ATEX/ESD · Antistatic
TIMBERDUC PUR 533 AS
TIMBERDUC PUR 533 AS is the robust industrial version with increased pressure and vacuum resistance compared to the 531/532 series. Antistatic PUR wall, intended for demanding industrial woodworking applications where abrasion resistance and pressure tolerance are decisive.
- Antistatic wall
- Permanently antistatic
- DIN 4102-B1
- -40 to +90 C
- Abrasion-resistant PUR
- Highly flexible 3:1
Why this hose?
TIMBERDUC PUR 533 AS is built specifically for the combined demands of the timber industry: combustible dust, static electricity, abrasive particles and fire classification requirements. The wall is permanently antistatic, and the property resides in the PUR formulation itself. It is not an additive surface coating that wears off over time.
The wear resistance of the PUR wall is significantly superior to PVC and rubber, meaning longer service life in environments where the hose is constantly subjected to chips, wood dust and granulate. TIMBERDUC PUR 533 AS has spring-steel reinforcement embedded in the wall -- this provides pressure resistance, vacuum stability and a smooth interior surface that reduces air resistance and pre-cleaning activity.
Fire classification to DIN 4102-B1 means the hose burns only locally and does not spread the flame. Together with the antistatic wall, this makes the hose an obvious choice for CNC routers, joineries and filter plants, where a flame-spreading hose would escalate a local ignition.
Where it is used
The hose typically sits between a suction arm or machine hood and a filter unit or cyclone. In the wood industry it is the standard solution for everything from smaller carpentries with a single suction arm to large CNC plants where several thousand cubic metres of air per hour must be moved without flame spread or static charging.
In the paper industry the hose is used for cutting, perforating and winding, where paper dust accumulates quickly. The fire classification is required by building regulations in many countries for installations on woodworking machines. The hose is earthed via worm-drive clamps or flange connections, and we are happy to advise on compatible accessories.
In CNC milling the hose is typically mounted on a moving extraction arm that follows the spindle's movement. High flexibility means the hose does not kink in extreme positions, and the low weight significantly reduces the load on the machine's extraction arm.
TIMBERDUC is colloquially known as a wood-dust hose, chip hose or extraction hose.
Technical specifications
Specifications are applicable per the manufacturer's factsheet (15.04.2026).
| Material | Polyurethane (PUR), permanently antistatic |
|---|---|
| Colour | transparent / black |
| Wall construction | PUR wall with spring-steel reinforcement; AS formulation |
| Spiral material | Spring-steel wire embedded in the wall |
| Temperature | -40 to +90 C |
| Fire class | DIN 4102-B1 (hard to ignite) |
| Compression | 3:1 |
| Duty class | Industrial heavy duty |
Dimensions and ordering
The dimension table shows the standard variants TIMBERDUC is produced in. Additional dimensions are often possible -- contact us for special requirements.
| Inner Ø |
Bend radius |
Max. length |
Weight |
Article no. |
|---|---|---|---|---|
| 100 | 98 | 16 | 1.2 | 53301002173 |
| 104 | 100 | 15 | 1.24 | 53301042173 |
Fields without a value (em-dash) are not specified in the manufacturer's factsheet. Overpressure and underpressure values are recommended operating limits; the product can be subjected to higher loads on request. Bend radius is measured along the inside of the hose bend.
Standards and compliance
The hose is manufactured in accordance with the following standards and directives.
- DIN 4102-B1. German fire classification -- B1 means hard to ignite and only local burning without flame spread.
- RoHS directive (2011/65/EU). Restriction of hazardous substances in electrical and electronic equipment. Manufacturer declaration available.
Documentation and downloads
Additional documents about this hose, its compliance and installation. Click to download as PDF in a new tab.
Help with material selection
If you're choosing a hose and are unsure about the right resistance level or zone classification, these two articles are a good place to start:
The invisible weakest link
Why a conductive or antistatic hose isn't sufficient on its own — and what grounding means for the complete system.
Know your ohm
The difference between antistatic and conductive, which resistance limits apply where, and how to measure them correctly.
Industries that use it
The TIMBERDUC series is designed for the specific requirements of the wood industry: highly flexible suction and pressure hoses that resist abrasion, accumulate no static electricity and meet the safety regulations of the German Wood Trade Association. Used across woodworking, the paper industry and filter systems.
Wood dust extraction is one of the most hazardous applications in industry, because fine dust is combustible, forms explosive mixtures and builds up static electricity quickly. TIMBERDUC hoses have a permanently antistatic wall, so accumulated charge can be led to ground as soon as the hose is assembled and earthed correctly.
The NORRES factsheet for this variant states no ATEX zone classification, so the hose should not be used as the basis for zone documentation. The flame-retardant classification to DIN 4102-B1 means the hose burns only locally and does not spread the flame, which is critical in extraction and filter installations.
In CNC milling, sawing and grinding the hose is subjected to constant abrasive loading from chips and particles. The wear resistance of the PUR wall is significantly superior to PVC or rubber, which considerably extends service life in dusty environments. High flexibility with a 3:1 compression ratio allows the hose to be routed around edges and machine structures without kinking.
Custom lengths and assemblies
The hose can be delivered cut to desired lengths. The standard lengths in the table can be supplemented with shorter pieces or continuous rolls by arrangement.
At Particulair we are happy to advise on sizing, earthing and couplings. Send us an outline of your application and we will assess the right variant and length.
Frequently asked questions
Is TIMBERDUC PUR 533 AS ATEX-approved?
The NORRES factsheet for this particular variant states no ATEX zone classification. The hose is described as antistatic and flame-retardant to DIN 4102-B1, but without a documented zone assignment. If the installation has to be documented under ATEX 2014/34/EU, we recommend TIMBERDUC PUR 533 AS (MD), whose factsheet states zones 0, 1 and 2 for gases and flammable liquids and zones 20, 21 and 22 for combustible dust.
What do XLD, LD, MD mean in the product name?
XLD = extra light duty (thinner wall, suitable for light dust and air), LD = light duty (standard daily use), MD = medium duty (specifically for CNC milling, thicker wall). The 533 series is industrial heavy duty. Choose the variant according to the actual mechanical and pressure load.
Does TIMBERDUC need to be earthed to function antistatically?
Yes. The antistatic property requires the hose to be connected to ground via the coupling. An antistatic hose without proper earthing is not antistatic in practice, because accumulated charge must be able to be led away. Use worm-drive clamps or flange connections with a documented ground termination.
What is the difference between TIMBERDUC and a standard PUR hose?
TIMBERDUC has a permanently antistatic wall and fire classification DIN 4102-B1. A standard PUR hose without AS marking can build up static electricity and is not flame-retardant, which makes it unsuitable for wood-dust extraction. The difference lies in the material formulation, not the geometry.
How long does TIMBERDUC last in daily use?
Service life depends on load and particle aggressiveness. In daily chip and dust extraction, a service life of 5-10 years is typical for 532 LD and 533 AS, while 531 XLD in light applications can last 3-5 years. Annual inspection of wear points and spiral winding is recommended.
Can the hose be delivered in lengths other than those listed?
Yes. The standard roll lengths in the table can be supplemented with shorter pieces or continuous rolls by arrangement. Contact us with your application sketch and we will find the right variant and length.
Which couplings are recommended for this hose?
We recommend worm-drive clamps or dedicated flange connections. The hose is typically assembled via metal couplings that make direct contact with the spiral reinforcement. We are happy to advise on sizing and supply complete assemblies.
How do I store the hose?
Store in a dry, dark place at room temperature. The hose can be compressed up to 3:1 without damage. Avoid direct UV light and contact with solvents during storage. The hose is typically delivered on a roll.